How did you make your growbeds? I’m curious as to how the tops are fastened together. Thanks for sharing the photos and please keep them coming.
Unless someone like you cares a whole awful lot, nothing is going to get better. It's not.-- Dr. Seuss, The Lorax
Simplicity of character is the natural result of profound thought~fortune cookie
Unless someone like you cares a whole awful lot, nothing is going to get better. It's not.-- Dr. Seuss, The Lorax
Simplicity of character is the natural result of profound thought~fortune cookie
How did you make your growbeds? I’m curious as to how the tops are fastened together. Thanks for sharing the photos and please keep them coming.
HOPE THIS HELPS
2 MM PLASTIC ROLL I BOUGHT (2MMX3000MMX30 000MM) IF I REMEMBER RIGHT.
I CUT THE PLASTIC IN LENGHT OF MY TRAY AND THEN
MY TRAYS WERE FOLDED TO HAVE A DEPTH OF 200MM
......BUT THEY STARTED BALLOONING WITH THE STONES AND WATER
SO +- EVERY 500 MM I TIED A LINE ACROSS TO KEEP THE SIDES UP
CAN WORK WELL FOR GROW TRAYS/YOU HAVE TO SUPPORT SIDES BETER
CHEAP EVERLASTING AND DURABLE
CHEAP AND EASY
FORGOT TO MENTION
THE TRAYS ARE ONLY ABOUT 150 MM HEIGH NOW
I LOST 1/4 OF MY DESIGN HEIGHT FROM 200 TO 150
THIS IS A PROBLEM BUT CAN BE FIXED WITH LITTLE COST
MY DROP FROM THE INLET END TO MY OUTLET IS NOT SHARP
I NEED MORE FLOW
SOMETHING ELSE I WIL MAKE SURE I GET RIGHT NEXT TIME