Quick post before I do some work, work,,, Bought a temp/humidity sensor Temp got up to 80 degrees F and with an RH of 66%.
Opened the door to get rid of some of that humidity,,, all the rain before I covered it is now condensing on the inner plastic.
Not sure if my fan moves enough air, so I picked up another fan, here's the original,,,
And here's a pic of the back. I dug along the North wall, tucked the plastic in and around to the inside of the GH. What I should have done was kept the plastic even and put both layers on the outside, but, was fighting time, and weather conditions, and wasn't sure it was long enough, and hadn't thought of it,,,