Howdy folks, I started my stucco grow bed project and wanted to share some photos. I’ve had an empty wooden box where my grow bed is supposed to be for some time now. The original plan was to put in a liner. I had some success with the ferrocement grow box so I decided to do the stucco instead. I think the stucco will cause some problems with ph and cracking while curing. To solve these problems I am going to use a waterproofing material used in e.i.f.s. or synthetic stucco. It’s kind of like spreadable rubber with a thin fiberglass mesh. Next I will use the Sweetwater epoxy paint. The only problem I can see after that is the bed will outlast the stand it sits on.